EcoFlow RIVER + Extra Battery Bundle
$549.00 Original price was: $549.00.$349.00Current price is: $349.00. Exc. Vat
Compact and portable, EcoFlow RIVER Series is an ideal recreational power which gives you accessibility to handy wall outlets. EcoFlow RIVER is the perfect companion for camping, overlanding, tailgating, boating, etc.
- 3 x 600W AC OUTLETS AND 288Wh CAPACITY
- RECHARGE FROM 0% TO 80% WITHIN 1 HOUR
- COMPATIBLE WITH 80% HOME APPLIANCES
- FIT YOUR NEEDS, NOW AND LATER
Feel free to attach and detach the EcoFlow RIVER Extra Battery to meet your needs now and later.
- DOUBLE THE CAPACITY FROM 288WH TO 576WH
- RIVER + EXTRA BATTERY = EcoFlow RIVER BUNDLE
*Please NOTE: This item is only applicable to orders in the US mainland states(except Hawaii, Alaska, Virgin Islands and Puerto Rico).
X-Boost Smart Algorithm
Faster Recharging Speed
Power that Grows with You
With the modular design and the Extra Battery, you can easily expand the capacity of RIVER from 288Wh to 576Wh.
EcoFlow RIVER : Lightweight and portable, perfect for a weekend trip or tailgating events;
EcoFlow RIVER + Extra Battery: Compact and reliable for outdoor adventures or RV/van usage.
Power 10 Devices Simultaneously
Power that Grows with You
Compact and Portable
Power a Wide Range of Devices
How to install EcoFlow RIVER Extra Battery?
1. Please make sure that the EcoFlow RIVER is turned off. Take out the screwdriver from the extra battery module kit and locate the four screws on the bottom cover.
Note: Please pay attention to prevent static electricity during the installation process.
2. Please remove the 4 screws and the bottom cover. The extra battery module should be positioned as shown in the figure.
3. Align the male and female battery sockets and connect them. Close the bottom cover. Take the four long screws from the kit and screw them on the screw mouth.
4. Put the EcoFlow RIVER upright and turn it on. The extra battery’s ambient light will turn on. If the extra battery module indicator light is shown on the EcoFlow RIVER ‘s display, it is activated successfully. If the ambient light or the extra battery module indicator light is not active, repeat the installation steps and then check the connection.
Note: It is not recommended to use the RIVER series power station to power heavy-duty devices e.g., air conditioners, ovens or washing machines.
Please conduct full test on a case-by-case basis to confirm the X-Boost feature works with your appliances.
Warning: DO NOT use RIVER series portable power station AC charging cables on DELTA series power stations. EcoFlow takes no responsibilities for any damages caused by customers’ failure to follow instructions. Doing so will void the warranty.
What EcoFlow RIVER + Extra Battery Can Power?
*The duration and times of the appliances indicated in this table are for reference only.
What's in the box
EcoFlow RIVER Portable Power Station
EcoFlow RIVER Extra Battery
Frequently Asked Questions
1) When AC output is between 0-400W, the sound level is around 42 dB at 1 meter from RIVER, which is simialr to the sound level in the library.
2) When AC output is between 400-600W, the sound level is around 48 dB at 1 meter from RIVER, which is similar to the sound level in the office.
3) When charging RIVER through X-Stream AC input, the sound level is 45 dB at 1 meter from RIVER, which is simialr to the sound level in the office.
4) When charging RIVER under quiet mode, the sound level is 40 dB at 1 meter from RIVER, which is simialr to the sound level in the library.
Yes. You can connect 1*110W solar panel or 2 sets of 110W solar panels in parallel to get more solar power.
There are two methods to connect:
Using Wi-Fi:
a. Long press the IOT Reset button on RIVER until you hear a “beep” sound.
b. Find the device in the Wi-Fi setting on your phone. Click the device to connect.
c. Go back to the EcoFlow App. Click the + on the top right to start connection.
d. Tick the “operation confirmed” and proceed to the next step.
e. Choose the Wi-Fi and enter the password to proceed.
f. Wait until the connection is finished.
Using Hotspot:
a. Long press the IOT Reset button on RIVER until you hear a “beep” sound.
b. Find the device in the Wi-Fi setting on your phone. Click the device to connect.
c. Wait until the connection is finished.
If your device successfully connect with your app, it will appear on your “Devices” list.
Using Hotspot:
a. Long press the IOT Reset button on RIVER until you hear a “beep” sound.
b. Find the device in the Wi-Fi setting on your phone. Click the device to connect.
c. Wait until the connection is finished.
If your device successfully connect with your app, it will appear on your “Devices” list.
RIVER supports an entry-level UPS function. But please perform multiple tests to confirm compatibility before connecting devices such as data servers and workstations with RIVER . EcoFlow will not be responsible for any loss of data or equipment damage caused by customers’ failure in following the instructions.
The firmware can be upgraded using the EcoFlow App.
a. Make sure the RIVER is plugged into AC power source or has at least 50% power and System Power is ON.
b. Disconnect all other input or outputs from the RIVER .
c.Make sure the 2.4 GHz WiFi router signal is strong.
d.On the System Settings page, tap “Update” button
e.Four packages will be downloaded and installed. While this happens the icons on the LCD display may flash which is normal.
f. Close and reopen EcoFlow App and verify the new Version number appears on the Device System page.
a.Make sure your APP is connected to the device you need to use.
b.Make sure that your device is on.
c.Make sure the Wi-Fi your device connected to is on.
d.Find your device in the APP then explore the functions you would like to accomplish remotely through the APP
Click “AC” on the device page of the APP, and you could turn on the “X-Boost” function after entering the page.
*In order to save power, it is recommended to turn off the X-Boost function when you don’t need to use it.
*X-Boost technology’s built-in advanced algorithms would be able to run devices with up to 1200W per draw, but it is recommended to test before use.
*X-Boost mode is NOT suitable for ALL appliances. Some 600W-1200W appliances with strict voltage requirements may not function (eg. air compressor). Please test to confirm before using the device. X-Boost mode is enabled by default. You can disable it on the APP.
Find your devices on the “Devices” Page, go to the “System” button, then you will find the firmware version by clicking “Version” on the system page.
Open the APP, find “Help & Feedback” under the user page, and click “Feedback”
Specifications of EcoFlow RIVER
Net Weight
*11 lbs (5kg)
Dimension
*11.3 x 7.3 x 7.7 in (28.8 x 18.5 x 19.4 cm)
Charge Temperature
32-113°F +/- 5°F (0-45°C +/- 3°C)
Discharge Temperature
-4-113°F +/- 5°F (-20-45°C +/- 3°C)
Color
Cyber Black
Warranty
24 months
Charge Method
AC Wall Outlet, 12V Car Adaptor, Solar Panel
Full Recharge Time
1.6 Hours (AC)
3 Hours (12/24V Car Adaptor)
1.6-3 Hours (Using 2x110W Solar Panels simultaneously with full sun)
2.4-5 Hours (Using 1x160W Solar Panel with full sun)
Capacity
288Wh (28.8V)
Cell Chemistry
Lithium-ion
Cycle Life
500 Cycles to 80%+ capacity
Management Systems
BMS, Over Voltage Protection, Overload Protection, Over Temperature Protection, Short Circuit Protection Low Temperature Protection, Low Voltage Protection, Overcurrent Protection
AC Charge Input Power
X-STREAM Charge 250W max
AC Charge Input Voltage
100-120Vac(50Hz/60Hz) International Version 220-240Vac(50Hz/60Hz)
Solar Charge Input
200W 10-25V DC 12A max
Car Charger
12V DC 8A max
AC Output (x3)
600W (Surge 1200W) total,120Vac( 50Hz/60Hz)
USB-A Output (x2)
5V DC,2.4A,12W Max, per port
USB-A Fast Charge (x1)
5V/2.4A,9V/2A,12V/1.5A 18W Max
USB-C Output (x1)
5V DC,9V DC,12V DC,15V DC,20V DC,5A,100W Max
Car Power Output (x1)
136W, 13.6V DC, 10A Max
DC5521 Output (x2)
13.6V DC, 3A Max, per port
Specifications of EcoFlow RIVER Extra Battery
Net Weight
*5.5 lbs (2.5kg)
Dimension
*11.2 x 7 x 2.3 in (28.5 x 18 x 5.9 cm)
Charge Temperature
32-113°F +/- 5°F (0-45°C +/- 3°C)
Discharge Temperature
-4-113°F +/- 5°F (-20-45°C +/- 3°C)
Color
Black
Warranty
24 months
Capacity
288Wh (28.8V)
Cell Chemistry
Lithium-ion
Shelf Life
1 year (after fully charging the device)
Cycle Life
500 Cycles to 80%+ capacity
Testing and Certification
UL Standard CE FCC RoHS RCM
Reviews
There are no reviews yet.